Introduction

To access Wi-Fi Secure, you will need to be added as a user to Connect by your Site Manager. You will then be able to use a username and password to connect to the building's secure Wi-Fi network. 

You will receive an email similar to the one shown below. If you have not, check your junk mail folder, and then please contact your Site Manager.

You need to connect your device to the wireless network Wi-Fi Secure. You will be prompted for a username and password. Enter the details provided in the email. Once you have logged on to that device you should not need to enter details again to access the Wi-Fi.

Some devices may ask you to install a certificate to allow access to the Wi-Fi. This is due to the highly secure nature of the solution and so the certificate will need to be accepted before the device can connect.

Using an Operating System older than Windows 10

If your device is using a Windows Operating System that is older then Windows 10, you will need to download our Wi-Fi configuration tool and run it on your machine before you can connect. A link to this will be included in your invitation email, or you can access it here.

This tool is a .exe file which creates a wireless profile on your PC with the necessary settings required for Wi-Fi Secure to work. No other changes are made and no other software is installed. Wi-Fi Secure uses 802.1x authentication (WPA2 Enterprise) so it's not a 'normal' Wi-Fi network.

If you don't want to run the .exe, or are unable to due to security/permission reasons, please see this article which will walk you through inputting the settings manually. You may need help from your local IT administrator to complete this.
 
Once you have run the file you can connect to ‘Wi-Fi secure' and enter your username and password as provided in the email above.

If this doesn't work please follow the steps outlined in the Windows Manual Setup.


Windows 10

Open your network settings by clicking on the wifi icon on the bottom right-hand side of your desktop.

Select the WiFi Secure network from the list of available WiFi networks, then enter the username and password given in the email to log on,

Once complete, you will connect to the WiFi Secure network. 

If this doesn't work please follow the steps outlined in the Windows Manual Setup.


MacOS

You need to connect your device to the wireless network ‘WiFi Secure’ and when
prompted, use the username and password given in the email to log on. Once you have logged on to that device you should not need to enter details again to access the WiFi.

Some devices may ask you to install a certificate to allow access to the Wi-Fi. This is due to the highly secure nature of the solution and so the certificate will need to be accepted before the device can connect.

Mobile - Android

Navigate on your phone to settings>Wi-Fi

Select WiFi Secure from the list of available networks.

Once selected you will then be prompted to enter the following information

  • EAP Method - PEAP
  • Phase-2 authentication - MSCHAPV2
  • CA certificate - Do not validate
  • Identity - The username from your sign-up Email
  • Anonymous identity - leave this field blank
  • Password - The password from your sign-up Email

Once the credentials have been added, click connect and you will be connected to the WiFi secure network.


Mobile - iOS

Navigate on your phone to settings>Wi-Fi

Select WiFi Secure from the list of available networks.

Once this has been selected, you will be prompted to enter their username and password.

When the credentials have been added correctly, you will be prompted to trust a security certificate


Mobile - Chrome OS

The chrome OS does not automatically setup the Wi-Fi Secure connection in all cases and needs to be manually configured, these instructions apply to the new Pixel phone and Chromebooks that are running the pre-installed chrome OS. You will need the sign-up Email we sent to you to complete this, if you do not have this then ask centre staff to resend.

Begin by connecting to the WiFi Secure network as with other devices.

You will be presented with a setup menu where you will be asked for various details relating to the setup, if you do not get this far then restart the device and try again then raise with centre staff to investigate the wireless before continuing.

Enter the details for the following fields:

  • EAP Method - PEAP
  • Phase-2 authentication - MSCHAPV2
  • CA certificate - Do not validate
  • Identity - The username from your sign-up Email
  • Anonymous identity - leave this field blank
  • Password - The password from your sign-up Email

All other details can be left as default, you should now be able to click "connect" and connect to the network, please check the details and re-enter password then raise with centre staff if further issues occur.

Did this answer your question?